Soil cultivation
Ploughing
Reconsolidation
Seedbed Preparation
Stubble cultivation
DRILLING
Mechanical Seed Drills
Pneumatic seed drills
Drill combinations
Soil cultivation
PLOUGHING
- Mounted reversible ploughs
Trend-setting plough technology
The Juwel generation of mounted reversible ploughs combines reliability of use, operating comfort and high work quality in an unrivalled manner.
More information can be found in the brochure by clicking the image.
Efficient technology for superior quality of work
The mounted EurOpal ploughs with two to seven furrows stand out through their excellent stability and low weight. They are easy to tow and therefore extremely economical to use.
More information can be found in the brochure by clicking the image.
Optimal ploughing with continuous working width adjustment
The VariOpal optimally meets all requirements for ploughing in arable farming. After all, good ploughing depends substantially on the cutting width and working depth of the individual plough bodies.
More information can be found in the brochure by clicking the image.
- Semi-mounted reversible ploughs
Perfect ploughing with the new OptiLine system
The new Diamant 16 is the answer to the high demands today’s large farms have, particularly in terms of handling, quality of work and increased productivity.
It can be ordered with 5 to 9 furrows, with interbody clearance of 100 or 120cm, and underframe clearance of 80, 85 or 90cm.
More information can be found in the brochure by clicking the image.
Stability, safety and reliability for constantly high loads
The increased traction produced by modern tractors places extremely high demands on the stability of the plow in combination with large working procedures. With a square beam of 180x180x10mm and the use of high-quality fine-grained steel, EuroTitan plows with 9 to 12 furrows are precisely designed for such very high constant loads, either for plowing in the furrow or outside the furrow.
More information can be found in the brochure by clicking the image.
High performance and perfect plowing
Different soil structure and changing weather conditions require easy adjustment of the working width of the plow, which significantly affects the agricultural production to be both environmentally friendly and economically viable. The VariTitan 10 is available in versions with 9 to 12 furrows, and a maximum working reach of as much as 660cm, for maximum output per hectare per unit time.
More information can be found in the brochure by clicking the image.
RECONSOLIDATION
- Integrated furrow presses
Integrated furrow presses are permanently attached to the plough and ensure optimal reconsolidation and transport
The integrated FixPack furrow press remains permanently attached to the plough, even during road transport and at the headlands.
The LEMKEN FixPack can be used with mounted reversible ploughs EurOpal/VariOpal with 3, 4 and 5 furrows and from 2m up to 2.50 metres working width.
More information can be found in the brochure by clicking the image.
Furrow press with flexible working width
The FlexPack furrow press frame runs parallel to the plough frame, consisting of pairs of rings with a diameter of 600 mm.
They are used with LEMKEN JUWEL 4, 5 and 6 furrow ploughs.
More information can be found in the brochure by clicking the image.
- Furrow presses
High efficacy in any soil
LEMKEN’s VarioPack offers the right solution for good reconsolidation in any conditions of operation: as flexible or front-mounted single- or double-row furrow press, with 700 mm or 900 mm ring diameter, and with a 30° or 45° ring profile.
More information can be found in the brochure by clicking the image.
SEEDBED PREPARATION
- Power harrows
Versatile power harrow for optimal seedbed preparation
Efficiency in all cultivation methods – The rotary harrows from the Zirkon range are optimally designed for maximum continuous loads.
For perfect seedbed preparation in both conventional and conservation tillage – in all types of soils! The Zirkon 8 power harrow is designed for tractors with 60 to 175 HP. A wide range of accessories allow this rotary harrow to be adapted to any conditions of operation. The Zirkon 8 can be easily combined with the LEMKEN Saphir and Solitair seed drills. The Zirkon 8 is suitable for both front-mounting and rear-mounting. Mounted, fixed models, working widths of 2.5m, 3m, 3.5m and 4m are available.
More information can be found in the brochure by clicking the image.
The power harrow for maximum continuous loads and any cultivation methods
The active tools of the Zirkon 12 produce an intensive mixing and crumbling effect to about 15 cm working depth and thus prepare an optimal seedbed in virtually any soil conditions. The intensity of cultivation can be precisely controlled via the forward travel speed, the PTO speed and the rotary harrow gearbox. ZIRKON 12 can be ordered as a mounted, fixed model of 3m, 3.5m, 4m and 4.5m working width, or as a mounted/semi-mounted folding model of 4m, 4.5m, 5m and 6m working width.
More information can be found in the brochure by clicking the image.
- SEEDBED COMBINATION
High-efficacy seedbed preparation with versatile equipment options
The Korund seedbed combination stands out through its excellent levelling, loosening and crumbling of the soil with high acreage performance. The implement’s particular strengths shine in the professional cultivation of potato and maize, as the large range of available tine sections includes the right solution for any needs. It is intended for tractors with power from 65 hp to 245 hp and is produced exclusively as a mounted, fixed (3m) or folding machine, working widths of 4.5m, 6m, 7.5m and 9m.
More information can be found in the brochure by clicking the image.
Optimal results with a single pass
The System-Kompaktor is the ideal implement for preparing a finely crumbled, well-reconsolidated seedbed with a consistent depth. This creates ideal conditions for an even pre-emergence of fine seeds in particular, such as sugar beet and rapeseed, which is a guarantee for high emergence rates. Various tool and roller combinations are available for optimal crumbling and reconsolidation of the seedbed. In addition to the various tine fields with goose-foot shares or gamma tines, pipe rod crumblers or flat rod crumblers can be combined with various trailing rollers. With the choice of a combined axle, the Compactor can be aggregated with a Solitair pneumatic seed drill. Working ranges from 3m to 6m, as mounted or pulled, and fixed or folding variant, for tractors from 100 hp to 250 hp, while for large farms we also offer System GIGANT tool carriers, in ranges from 8m, 10m and the largest of even 12m.
More information can be found in the brochure by clicking the image.
STUBBLE CULTIVATION
- Compact disc harrows
High speeds of work with low power requirements
The Heliodor compact disc harrow can be used for both shallow stubble cultivation in light and medium soils and for seedbed preparation for mulch seeding or after ploughing, making the Heliodor a versatile compact disc harrow for conventional and mulch seeding. The maintenance-free angular ball bearings of the convex discs (510 mm diameter) feature special labyrinth sealing rings to protect them against dust, dirt and water penetrating. Due to the remarkably low weight of the Heliodor, implements with 2.5 to 7 metres working width can be attached to the tractor’s three-point linkage. The mounted Heliodor versions with 3 and 4 metres working width, and the semi-mounted versions with 4 to 6 metres working width can be combined with LEMKEN’s pneumatic Solitair seed drill. Larger farms can achieve working widths of 8 to 16 metres in combination with the LEMKEN Gigant system carrier to achieve particularly high efficacy in seedbed preparation.
More information can be found in the brochure by clicking the image.
Always straight, without counter-steering
The Rubin 10 sets new standards in the field of compact disc harrows and offers a wide range of improvements. Even under difficult conditions, the Rubin 10 ensures intensive and homogeneous mixing of organic matter and soil up to a working depth of approx. 14 cm. The discs are arranged to produce symmetrical forces on both implement sides. The three central discs on the Rubin 10 have been offset along the longitudinal axis to ensure that they are able to work collision-free across the full width at a line distance of 12.5 cm. Mounted, fixed models can be ordered in 2.5m, 3m, 3.5m and 4m width; mounted, foldable in 4m, 4.5m and 5m width, while semi-mounted are produced in 4m, 4.5m, 5m, 6m and 7m versions.
More information can be found in the brochure by clicking the image.
Compact disc harrow with deep impact
With the Rubin 12, LEMKEN’s range of compact disc harrows includes an implement that can operate at the same 20 cm working depth as a cultivator. The Rubin 12 is therefore suitable both for stubble cultivation and for primary soil tillage, even in very heavy soil conditions. Two rows of serrated concave discs with a diameter of 736 mm produce intensive mixing and crumbling. The symmetrical arrangement of the discs in each row enables working without lateral pull, even at high driving speeds. Mounted, fixed versions are sold in 3m, 3.5m and 4m, while semi-mounted, folding machines can be ordered in 4m, 5m, 6m and 7m widths.
More information can be found in the brochure by clicking the image.
- Cultivators
Optimal quality of work and compact design
Due to its low lifting power requirement, the implement can be attached via a three-point linkage up to a working width of 6 metres. The shape of the 47 cm wide TriMix shares with curved guide plates at the wing shares produces highly intense mixing results. Semi-mounted versions can be combined with LEMKEN’s combination trailer and thus coupled with the Solitair pneumatic seed drill. Mounted, fixed models exist in 3m, 3.5m and 4m widths, while mounted or semi-mounted, foldable models can be ordered in 4m, 5m and 6m widths.
More information can be found in the brochure by clicking the image.
Intensive work in shallow and deep stubble cultivation
The Karat intensive cultivator is suited for both the first, shallow stubble cultivation across the full surface after combine harvesting and for subsequent, deeper passes with intensive mixing, or for seedbed preparation for mulch seeding. The innovative quick-change system allows the shares to be replaced quickly and easily, without requiring tools, to adapt the cultivator for shallow or deeply mixing cultivation to meet a wide range of requirements. The depth control in the mounted Karat is easily accessible, and the working depth can be adjusted finely between 5 and 30 cm without tools. The semi-mounted versions feature a hydraulic working depth adjustment. Mounted, fixed models are 3m, 3.5m and 4m; mounted, folding models of 4m and 5m, while semi-mounted, folding models of 4m, 5m, 6m and 7m are available.
More information can be found in the brochure by clicking the image.
DRILLING
MECHANICAL SEED DRILLS
Electric seeding shaft drive for reliable, variable seed metering
The electric seeding shaft drive allows a wide range of different seeds to be precisely metered at seeding rates from 0.5 to 500 kg/ha. Seeding rates can be quickly and easily set through a single calibration process. The electric motor and job computer are located well protected at the front of the seed drill. The implement is operated comfortably from the tractor cabin via the display of the Solitronic electronic control unit. The seeding rate can, for example, be easily adjusted while driving by simply pressing a button. Working widths are 3m and 4m, the volume of the bunker is 800 l or 1,050 l, and the row spacing is 12.5 cm or 15 cm.
More information can be found in the brochure by clicking the image.
Powerful mechanical sowing technology for all working conditions
The SAPHIR 9 mechanical seed drill is the ideal machine for small and medium-sized farms – it is short, compact and versatile! The possibility of use in the unit with the ZIRKON rotary harrow or as a solo machine, mounted on a metal roller with a diameter of 500 mm necessary for the stabilization of the sowing zone, make SAPHIR 9 the optimal seed drill for different conditions and working methods. The EcoDrill electronic control unit with LET-40 monitor is responsible for precise maintenance of the sowing rate ranging from 0.5 to 500 kg / ha, while each seed type can be precisely dosed thanks to the system for quick change of sowing wheels. The working width of the machine is 3 m, the volume of the bunker is 860 l or 1,160 l, while the row spacing is 12.5 cm or 15 cm.
More information can be found in the brochure by clicking the image.
PNEUMATIC SEED DRILLS
The versatile pneumatic seed drill
The Solitair 9 pneumatic seed drill is available as a mounted rigid or folding version, or as semi-mounted folding version in working widths of 3 to 6 metres. As it can be combined with various soil cultivation implements or run in solo operation, it can be used in a wide range of applications and with various cultivation methods. The Solitronic control unit is used for sowing control and monitoring, with a color monitor that facilitates the driver’s work, the sowing shaft is electrically driven, while the system of double disc feeders (https://lemken.com/en/technology/double-disc-coulter-optidisc/ ) in charge of maintaining a constant sowing depth, even on different soils and at high working speeds, in the range of sowing norms from 1.5 to 300 kg / ha. The row spacing can be selected at 12.5cm or 15cm, while the hopper volumes range from 1,100 l, over 1,850 l, to as many as 2,300 l on semi-mounted seed drills. SOLITAIR 9 can be ordered as a solo machine, although the best results are achieved in the unit with HELIODOR or RUBIN short disc, or rotary harrow ZIRKON, while in addition to these tools, with semi-mounted drills the possibility of aggregation is further extended to the grubber KRISTALL or heavy seed hopper KOMT , which makes the SOLITAIR 9 a truly versatile seed drill.
More information can be found in the brochure by clicking the image.
Pneumatic seed drill for small and medium farms
SOLITAIR 8 is the ideal seed drill for small and medium-sized farms looking for an economical way to use high-precision pneumatic seed drill technology, for both conventional and conservation tillage. The seeder is characterized by Easytronic system with control and adjustment of sowing rate and permanent tracks, mechanically driven sowing shaft, hydraulic fan drive, as well as the system of parallelogram suspension of double disc feeders ( https://lemken.com/en/technology/double-disc-coulter-optidisc/ ) which is in charge of maintaining a constant sowing depth, regardless of the speed and type of soil. It can be ordered as a solo machine, although it achieves the best results in the unit with a compact disc harrow HELIODOR or power harrow ZIRKON, according to the system of 2 machines in 1. Working distances are 3m, 3.5m or 4m, row spacing 12.5cm or 15cm, while the bunkers have a volume of 1,100 l or 1,850 l.
More information can be found in the brochure by clicking the image.
SEEDING COMBINATIONS
Fast, trailed pneumatic drill combination
With modern seed drill technology, sowing efficiency is becoming more and more important, yet no compromises should be made regarding good reconsolidation and optimal placement of seeds. Also, it must be possible to use drill combinations universally in both mulch seeding and conventional tillage seeding approaches. LEMKEN’s Compact-Solitair 9 meets all of these requirements optimally. The concept of the drill is as follows – pre-sowing preparation is done either by an integrated short disc harrow HELIODOR or rotary harrow ZIRKON 12, with hydraulic depth adjustment, followed by rubber wheels with a diameter of 420/65-R20, laterally offset, with AS profile, which reduces the required traction , serves as a packer roller for good re-consolidation in sowing, and also enables safe and fast road transport. Next in line is the TPW 500mm trapezoidal roller (optional), which provides additional soil compaction and stabilization exactly in the sowing row area, while the OptiDisc double disc feeder system (maintenance-free) with rubber pressure wheel is responsible for maintaining uniform sowing depth, without blocking. even at high operating speeds. The standard OptiDisc system has mechanical adjustment of the feed pressure, while the hydraulic OptiDisc system can also be ordered as an option. The row spacing is 12.5cm or 16.7cm, towed, fixed versions are produced in 3m and 4m increments, with HELIODOR or ZIRKON 12 tools for pre-sowing preparation, while the grain bunker has a volume of 3,500 l. Also, the 4m or 6m version (HELIODOR front) can be ordered with a split hopper for granular mineral fertilizer, for which special fertilizer feeders are used between sowing rows. Trailed, foldable versions are produced in a width of 6 m, with a bunker with a volume of 5,000 l, in combination with a HELIODOR compact disc harow or ZIRKON 12 power harrow.
More information can be found in the brochure by clicking the image.